Transmitting the glow of Indian homes, our wide scope of exemplary strong wooden gates are made utilizing predominant quality made from 100% seasoned wood that guarantees toughness, strong strength, superior quality and the smooth surface that provides an aesthetic appeal and remarkable bonding of plywood . Modi Udyog is known for their high quality.

Veneers from high-quality logs are selected and peel off on automated peeling machines. High quality resins are used for gluing the veneers make Nacro plywood safe. Plywood are made of 100% gurjan faced. The strong wooden entryways are accessible at exceptionally reasonable costs.

Transmitting the glow of Indian homes, our wide scope of exemplary strong wooden gates are made utilizing predominant quality made from 100% seasoned wood that guarantees toughness, strong strength, superior quality and the smooth surface that provides an aesthetic appeal and remarkable bonding of plywood . Modi Udyog is known for their high quality.

Veneers from high-quality logs are selected and peel off on automated peeling machines. High quality resins are used for gluing the veneers make Nacro plywood safe. Plywood are made of 100% gurjan faced. The strong wooden entryways are accessible at exceptionally reasonable costs.

PLYWOOD SPECIFICATION

Dimensions (CL.8.)
	a.) Length:
			+6mm
			-0mm
	b.) width:
			+3mm
			-0mm
	b.) Thickness:
			±10% less than 6 mm
			± 5% above 6 mm
	d.) Squareness		0.2%
	e.) Edge Straightness		0.2%
Test
	1.) Glue Adhesion (CL.11.2)
	2.) Water Resistance (CL –11.2.3)		BWR grade boiling in water 8 hrs & dried for 16 hrs at 65±20C & followed six more cycles MR grade submerged in water at 60 ±20C for 3 hrs and dried for 8 hrs at temperature 65±20C & then followed same two cycles After then as per IS:1734 part 5 Adhesion of plies
	3.) Mycological (CL 11.2.2)		Sawdust charged with spores of the commonly ,wood destroying fungi & maintained the temp. 27 ±20C for a period of three weeks Adhesion of ply.
	4.) Moisture Contents CL 11.3		5 to 15%
Static Bending Strength CL 11.4	Along the grain				Across the grain
Grade BWR
	MOR N/mm 2		MOE N/mm 2		MOR N/mm 2		MOE N/mm 2
	Ind	Ave	Ind	Ave	Ind	Ave	Ind	Ave
	30	40	5000	4500	20	18	2200	2500
Test Result
Grade MR	Along the grain				Across the grain
	MOR N/mm 2		MOE N/mm 2		MOR N/mm 2		MOE N/mm 2
	Ind	Ave	Ind	Ave	Ind	Ave	Ind	Ave
	27	30	3600	4000	13	15	1800	2000
	32	49	4875	4652	22	35	2954	3652
Workmanship & Finish (CL.9)	1.) Plywood board shall be of uniform thickness within the tolerance limit 2.) Faces of plywood board shall be reasonably smooth and face veneers shall be of reasonably uniform thickness.